产品中心

TPP1000、TPP0500B、TPP0502 和 TPP0250 型号是泰克推出的高带宽通用探头，提供了这一产品系列之前从未使用的突破性技术规格。这些型号的探头专门针对泰克 MDO3000、MDO4000、MSO/DPO5000 和 5 系列 MSO 系列示波器而设计，能够提供高达 1 GHz 的模拟带宽，容性负载低于 3.9 pF。

主要性能指标

• 1 GHz、500 MHz 和 250 MHz 探头带宽型号

• <4 pF 输入电容

• 10X 和 2X 衰减系数

• 300 V CAT II 输入电压

• 适用于 MDO3000、MDO4000、MSO/DPO5000 和 5 系列 MSO 系列示波器

主要特点

• 紧凑型探头头部，适合探测小型几何电路元件

• 探头主体较小，更容易观察待测设备

• 刚性端部，保证了待测设备的连接性

• 小型 MMCX 可更换端部套筒，用于建立安全的免手持连接（仅限 TPP1000）

• 0.1 英寸（2.54 毫米）和 0.062 英寸（1.57 毫米）方针适配器连接到 MMCX 端部套筒，可轻松建立与方针头以及 0402 组件之间的免手持连接（仅限 TPP1000）

• 可更换的探头端部套筒

• 较大附件套件，具有多种连接能力

连接能力

• 集成的示波器和探头测量系统提供智能通信，可自动缩放和调整示波器显示屏上的单位，以与探头衰减匹配

• 内置交流补偿优化了整个频率范围的信号路径

应用

• 低功率设备

• 维修

• 生产工程测试

• 研发

准确的高速无源探测技术

这种极低的容性负载降低对电路的不利影响，能够允许更长的接地引线。而且由于探头的带宽较宽，因此能够查看对于高速应用极为重要的信号高频分量。TPP1000、TPP0500B 和 TPP0250 无源电压探头具有所有通用探头的优势，比如高动态范围、柔性连接选项以及耐用的机械设计，同时提供有源探头的性能。

准确低压

TPP0502 提供行业最高带宽 (500 MHz) 和最低衰减系数 (2X)，适于进行低压测量，比如波纹测量，这是对电源输出的常见测量。TPP0502 的低容性负载意味着还可以在此探头上应用长接地引线，同时对测量效果的影响最小，因而工程师可以更灵活地在设计周围移动，不必担心接地引线的长度问题。

P2220、P2221 无源电压探头

P2220 和 P2221 200-MHz 无源电压探头允许使用位于探头头部的一个开关选择 1X 或 10X 衰减。

P2220 探头兼容 TDS200、TDS1000、TDS1000B、TDS2000、TDS2000B 和 TPS2000 系列示波器。P2220 探头还为 TPS2000 系列示波器提供了高达 30 VRMS 的浮动测量功能。（注意：不能在 TDS2000、TDS2000B、TDS1000、TDS1000B 或 TDS200 系列示波器中进行浮动测量）P2221 兼容 MSO2000 和 DPO2000 系列示波器。

特性和优点

• 1X/10X 衰减

• 200 MHz 带宽

• 长 1.5 米

• UL3111-1、CSA1010.1、EN61010-1、EN61010-2-031 和 IEC61010-2-031

应用

• 相对低频测量

• 低频计算机和电信测量

• 电源

• 低频放大器

TPP0100、TPP0101 无源电压探头

TPP0100 和 TPP0101 探头是输入电阻为 10 MΩ 的 100 MHz、10X 无源电压探头。这些探头用于带有 1 MΩ/13 pF (TPP0100) 和 1 MΩ/20 pF (TPP0101) 输入的 BNC 示波器。

特性和优点

• 10X 衰减

• 100 MHz 带宽

• 长 1.3 米

• UL61010-031;2007，CAN/CSA C22.2 No. 61010-031-07，IEC61010-031；IEC 61010-031/A1:2008

应用

• 相对低频测量

• 低频计算机和电信测量

• 电源

• 低频放大器

The P6139B and P5050B probes are high bandwidth, high impedance 10X passive voltage probes with 10 MΩ input resistance. These probes feature a small probe head and sharp tip that makes it easier to probe dense circuitry. The P6139B and P5050B share similar electrical specifications but support Tektronix oscilloscopes with different compensation ranges. Visit theOscilloscope Probe & Accessory Selector Tool located atwww.tek.com/probesto ensure the correct probe is selected for your oscilloscope.

Key performance specifications

• 500 MHz probe bandwidth

• Large input impedance at the probe tip (10 MΩ, 8pF)

• 10X attenuation factor

• 300 v CAT II input voltage

Ease-of-use features

• Compact probe head for probing small geometry circuit elements

• Small probe body for enhanced visibility to the Device-Under-Test

• Replaceable probe tip cartridges

• Large accessory set for versatile connectivity

Connectivity

• P6139B and P5050B feature the TekProbe interface for direct BNC connection for oscilloscopes with 1 MΩ inputs.

• Integrated oscilloscope and probe measurement systems feature intelligent communication that automatically scales and adjusts units on the oscilloscope display.

Applications

• Low power devices

• Service

• Manufacturing engineering

• Test research and development

TPP0051 Passive Voltage Probe

The TPP0051 probe is for use on BNC oscilloscopes with 1 MΩ/20 pF inputs.

Key performance specifications

• 10X attenuation

• 50 MHz bandwidth

• 1.3 m length

• UL61010-031; 2007, CAN/CSA C22.2 No. 61010-031-07, IEC61010-031; IEC 61010-031/A1:2008

Applications

The P3010 and P6101B probes are designed to complement the Tektronix family of portable DSO and ART instruments.

Notice to EU customers

This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.

This product does not comply with the RoHS 2 Directive 2011/65/ EU and will not be shipped to the EU. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available.

Key features

• 1 MΩ inputs

• P6101B

• 1X, 15 MHz, 300 V CAT II

• Readout

• P3010

• 10X, 100 MHz

• Molded passive voltage probes

• Single-piece, molded rubber body

• Lightweight ergonomic design

• 10-times improvement in durability

• HYBRID/SMT circuitry on multi-layer circuit board for improved performance and reliability

• New stronger, replaceable probe tip

• Safety certification

• UL3111-2-031, CSA1010.2.031, EN61010-2-031, IEC61010-2-031

• 1-year unconditional guarantee

• Miniature probe tip compatible with a wide range of Tektronix accessories and adapters

• Mixture of high, medium, and low-frequency general-purpose relative measurements

• Engineering and Design

• Service

• Manufacturing

P3010 P6101B passive voltage probes

Passive voltage probes are the most commonly used oscilloscope probe. Other specialty probes expand the range and functionality of an oscilloscope as a measurement system; but a general-purpose, passive voltage probe, is the working end of the oscilloscope, a tool used every day by engineers and technicians.

Two years of customer research, design innovation, and an exhaustive test program resulted in a most remarkable family of oscilloscope probes. This family of passive voltage probes is specifically designed for Tektronix analog and digital portable oscilloscopes. The 1X and 10X switchable probes combine the same high-quality electrical performance that customers expect from Tektronix with a new rugged mechanical design.

These probes are encased in a resilient, molded rubber body that is virtually indestructible. They are lighter in weight, more comfortable to hold, and more reliable than modular probe styles. The probes' replaceable tips are designed to withstand up to 20 pounds of force. Patented integral strain relief allows complete freedom of movement while providing superior cable flex. Each probe has received UL safety certification and meets MIL-T-28800, Class 3, environment specifications - something portable oscilloscope users will appreciate.

The P3010, and P6101B probes are designed to complement the Tektronix family of portable DSO and ART instruments. The core of each probe's performance is supplied by a Tektronix HYBRID/SMT device.

The instrumentation experience possessed by Tektronix provides an extra margin of quality and reliability to the molded probes that is not commonly available to probe manufacturers. These molded probes have been designed and tested to support the overall system performance and measurement quality that Tektronix oscilloscopes guarantee.

Through the introduction of the molded probes, Tektronix has set a new standard for passive voltage probe styling, performance, and durability.

TPP0200、TPP0201 无源电压探头

TPP0200 和 TPP0201 探头是输入电阻为 10 MΩ 的 200 MHz、10X 无源电压探头。这些探头用于带有 1 MΩ/13 pF (TPP0200) 和 1 MΩ/20 pF (TPP0201) 输入的 BNC 示波器。

特性和优点

• 10X 衰减

• 200 MHz 带宽

• 长 1.3 米

• UL61010-031;2007，CAN/CSA C22.2 No. 61010-031-07，IEC61010-031；IEC 61010-031/A1:2008

应用

• 相对低频测量

• 低频计算机和电信测量

• 电源

• 低频放大器

技术规格

除另行说明外，所有技术规格适用于所有型号。

型号概述

P2220、P2221 无源电压探头

特点

10x 位置

带宽 - 直流至 200 MHz

探头长度 - 1.5 米

衰减率 - 10:1

补偿范围 -

P2220：15 至 25 pF

P2221：10 至 25 pF

输入电容 -

P2220：17.0 pF（典型值）

P2221：17.0 pF（典型值）

输入电阻 - 10 MΩ

最大输入电压 - 300 V CAT II

参考引线和接地之间的最大电压 - 30 VRMS*1

1x 位置

带宽 - 直流至 6 MHz

探头长度 - 1.5 m

衰减率 - 1:1

补偿范围 - 所有带有 1 MΩ 输入的示波器

输入电容 -

P2220：110 pF（典型值）

P2221：110 pF（典型值）

输入电阻 - 1 MΩ

最大输入电压 - 150 V CATII

参考引线和接地之间的最大电压 - 30 VRMS*1

*1 必须从尖端到接地电压中减去浮动电压。例如，如果参考引线浮动电压为 30 V RMS，探头位于 10X 位置，那么尖端到参考引线的电压不能超过 270 V RMS。

TPP0100、TPP0101 无源电压探头

特点

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Model overview

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Electrical characteristics

Physical characteristics

EMC, environment, and safety

Specifications

All specifications apply to all models unless noted otherwise.

Model overview

Physical characteristics

EMC, environment, and safety

TPP0200、TPP0201 无源电压探头

特点